Home
>
PRODUCTS
>
Steel Pipe Steel Tube
>
This ASTM A106 Gr.B seamless carbon steel pipe is produced for steam, condensate and high pressure process lines where a welded seam is not acceptable. The pipe is pierced from a solid billet and rolled on a mandrel mill, so the wall is homogeneous around the full circumference and there is no seam to be inspected, re-tested or re-qualified after years of thermal cycling. Jingwei supplies it in Sch40 with a 6 m random length, the size most often specified for boiler house headers and plant utility runs.
Because A106 Gr.B is a pressure application, every heat is followed from the steelmaking record to the finished bundle. Heat numbers are transferred to the pipe surface by stencil and repeated on the mill test certificate, so a buyer, a notified body or a site inspector can tie a single length back to its chemical analysis and tensile results. Our line at the Shandong works runs 21.3 mm to 914 mm outside diameter with wall thickness from 2.0 mm to 40 mm, which covers the small bore instrument runs and the large bore main steam pipe in one purchase order instead of two.
Key Features| Parameter | Specification |
|---|---|
| Product | Seamless carbon steel pipe for high temperature service |
| Standard | ASTM A106 / ASME SA106 Gr.B, API 5L Gr.B, ASTM A53 Gr.B |
| Outside diameter | 21.3 mm - 914 mm (1/2 inch - 36 inch) |
| Wall thickness | 2.0 mm - 40 mm, Sch20 / Sch40 / Sch80 / STD / XS |
| Length | 5.8 m, 6 m, 11.8 m, 12 m or cut to order |
| Tensile strength | 415 MPa minimum |
| Yield strength | 240 MPa minimum |
| Elongation | 30 percent minimum in 50 mm |
| Surface | Black varnished, bare, or 3PE / FBE coated on request |
| Ends | Plain, beveled, or threaded with coupling |
| Test | Hydrostatic, eddy current, ultrasonic on request |
| Delivery condition | Hot rolled, normalized on request |
The main demand for A106 Gr.B comes from steam distribution, boiler feedwater, condensate return and compressed air headers in power plants, paper mills, sugar mills and chemical works. It is also used for high pressure oil and gas gathering lines where a PSL2 impact test is not required, and for general mechanical structures that carry vibration or thermal movement.
For buyers comparing options: A53 Gr.B is the general service version and is usually supplied with a lighter test package, while A106 Gr.B carries the higher temperature allowance and is the safer choice for anything above 350 degrees C. If the line will run sour or in low temperature service, tell us at enquiry stage and we will quote A333 Gr.6 instead, because no amount of surface coating makes a carbon pipe suitable for those conditions.
Inspection, Documentation and PackagingEvery bundle is inspected before strapping: outside diameter and wall thickness at both ends, straightness under 1.5 mm per metre, visual check for laps, scabs and roll marks, and dye penetrant on beveled ends when specified. Hydrostatic testing is performed on 100 percent of lengths, and ultrasonic or eddy current testing can be added when the purchase order calls for it.
Pipes are bundled hexagonally, strapped at 1.5 m intervals, fitted with plastic caps and wrapped in waterproof paper for sea freight. Bundles are lifted with nylon slings rather than hooks. We load 20 ft and 40 ft containers with the bundle pattern that best fits the ordered length, and we supply a packing list with heat numbers, sizes and bundle weights so the receiving warehouse can check the shipment without opening every bundle.
Buyer Questions We Answer Before OrderingCan you supply Sch80 or heavier walls in the same heat? Yes. Sch80 and Sch160 are rolled to order in the same mill campaign, so one certificate can cover several schedules of the same outside diameter.
Is a 3.1 certificate included in the price? The EN 10204 3.1 mill test certificate is included. 3.2 witnessed certification and third party inspection are quoted separately because they add mill time.
How do you protect the bevel during shipping? Beveled ends are coated with rust preventive and protected by plastic caps or steel rings, and bundles are separated by wooden dunnage so the ends never touch.
Contact Us at Any Time