Home
>
PRODUCTS
>
Steel Pipe Steel Tube
>
Galvanized pipe fails in two ways: the zinc is too thin at the thread, or the coating is uneven on the inside wall where nobody looks. This BS1387 hot dipped pipe is aimed at both problems. Coating mass is checked at 275 g per square metre average with a 245 g local minimum, measured by the stripping method on samples taken from each lot, and the pipe is galvanized after threading where the order calls for threaded ends, so the exposed steel at the thread is covered rather than left bare.
The base pipe is ERW carbon steel to BS1387 medium or heavy series, straight, round and free of the spiral weld bead that catches on a wrench. Standard length is 6 m with plain or screwed and socketed ends, and both ends are reamed so the bore is clear before the socket is fitted. This is the specification we quote most often for water supply risers, fire main branch lines, greenhouse framing and general plumbing export orders to Africa, the Middle East and South America.
Key Features| Parameter | Specification |
|---|---|
| Product | Hot dipped galvanized steel pipe for water service |
| Standard | BS1387, ASTM A53, EN 10255, ASTM A795 on request |
| Series | Light, medium, heavy |
| Nominal bore | 15 mm - 150 mm (1/2 inch - 6 inch) |
| Outside diameter | 21.3 mm - 168.3 mm |
| Wall thickness | 2.0 mm - 5.4 mm by series |
| Length | 6 m standard, 5.8 m or cut length on request |
| Zinc coating | 275 g/m2 average, 245 g/m2 local minimum |
| Ends | Plain, threaded BSP or NPT, with or without socket |
| Test | Hydrostatic 5 MPa, air tightness on request |
| Surface | Bright galvanized, chromium-free passivation optional |
| Packing | Bundle of 61 or 91 lengths as required |
The main uses are cold and hot water supply lines, fire sprinkler branch pipe, HVAC condenser water, greenhouse and livestock shed frames, and handrail or fence structures that will be painted later. Galvanized pipe is also common in scaffolding systems where the coating has to survive repeated handling on site.
One caution worth repeating to specifiers: galvanized pipe is not recommended for closed hot water systems above 60 degrees C without water treatment, because the zinc can passivate and the system can suffer white rust. For steam condensate or high temperature closed loops, black A106 pipe with external paint is the better engineering choice, and we will say so at quotation stage instead of simply taking the order.
Inspection, Documentation and PackagingIn-process checks cover base pipe dimensions, weld quality, coating adhesion by bend and hammer test, coating mass by stripping, and a hydrostatic test at 5 MPa. The thread is checked with go and no-go gauges, and each socket is checked for fit and for cracks at the collar. Photographs of coating thickness readings and thread gauging are provided with the pre-shipment report on request.
Bundles are strapped with galvanized strip, both ends are capped to protect threads and bores, and the bundle is marked with size, quantity, standard and heat number. For export we load 6 m lengths in 40 ft containers with wooden dunnage between layers, and 20 ft containers are used for mixed orders where several sizes are bundled separately.
Buyer Questions We Answer Before OrderingIs the inside of the pipe galvanized as well? Yes. The pipe is dipped as a whole, so both inner and outer surfaces are coated, with the inner coating mass included in the test report.
Can you supply black pipe and galvanized pipe in one container? Yes, provided each item is bundled and marked separately, and we keep the black pipe away from the wet galvanized bundles during loading.
Do you offer cut lengths with threads on both ends? Yes, we cut to your length and thread both ends, then galvanize the threads so no bare steel is exposed.
Contact Us at Any Time