Home
>
PRODUCTS
>
Steel Pipe Steel Tube
>
A heat exchanger tube is judged on three things: whether the surface inside stays clean, whether the wall holds at the tube sheet joint, and whether the alloy resists the chloride in the cooling water. This ASTM A213 TP316L tube answers all three. The 2 percent molybdenum addition gives it pitting resistance that 304 does not have, the low carbon 0.035 percent maximum avoids sensitization during welding and bending, and the bright annealed finish leaves an oxide-free surface that resists fouling and passes a borescope inspection on delivery.
At 25.4 mm outside diameter with a 2.11 mm BWG 14 wall, this is a standard condenser and chiller size. The tube is cold drawn, degreased, bright annealed in a hydrogen atmosphere and then straightened; 100 percent eddy current testing is performed after annealing so the test reflects the delivered condition rather than an intermediate one. Each bundle is hydrostatically tested or air tested at the buyer's option, and both ends are capped for transport.
Key Features| Parameter | Specification |
|---|---|
| Product | Stainless steel seamless heat exchanger tube |
| Standard | ASTM A213 / ASME SA213, ASTM A269 |
| Grade | TP316L (UNS S31603), TP304L on request |
| Outside diameter | 6 mm - 101.6 mm |
| Wall thickness | 0.5 mm - 8 mm |
| Length | up to 12 m, U-bent on request |
| Tensile strength | 485 MPa minimum |
| Yield strength | 170 MPa minimum |
| Elongation | 35 percent minimum |
| Hardness | 90 HRB maximum |
| Finish | Bright annealed, pickled and passivated optional |
| Test | Hydrostatic, eddy current, air underwater on request |
Applications include shell and tube heat exchangers, condensers, chillers, evaporators, feedwater heaters, and sanitary and high purity process lines in chemical, pharmaceutical, food and semiconductor plants. TP316L is the default choice where cooling water chlorides sit between about 200 and 1000 mg per litre; above that, a duplex or super duplex grade should be considered instead.
For U-bend bundles, order the tube with the bending and stress relief done at the mill rather than on site. Field bending of thin wall stainless tube almost always ovalizes the bend, and an ovalized tube will not pass the plug gauge or seal in the tube sheet. We supply U-bent tubes with the developed length, bend radius and leg lengths checked against the drawing before boxing.
Inspection, Documentation and PackagingTesting includes chemical analysis per heat, tensile and yield per lot, hardness, flattening and flaring, 100 percent eddy current inspection after final annealing, and hydrostatic or pneumatic testing per order. Surface roughness can be measured and reported for pharmaceutical and food orders, and a corrosion test in boiling nitric acid or copper sulphate can be added for intergranular corrosion evaluation.
Tubes are degreased, capped at both ends and packed in a plywood case with paper interleaving so tubes do not rub against each other. Cases are marked with heat number, size, quantity and bundle weight, and we supply a certificate package that includes the mill certificate, eddy current report and packing list in one reference number.
Buyer Questions We Answer Before OrderingWhat is the difference between bright annealed and pickled and passivated? Bright annealing gives a mirror-like oxide-free surface in a controlled atmosphere. Pickling removes oxide chemically and leaves a matte grey surface. Heat exchanger tubes usually specify bright annealed.
Can you supply TP316L in minimum wall? Yes, minimum wall certification is available with ultrasonic wall measurement recorded along the length.
Do you provide tubes with plastic caps and heat number tags per piece? Yes, per piece tagging is available for buyers who need to track individual tubes through a retubing job.
Contact Us at Any Time